hard-drive-not-installed-on-laptop

How to Fix “Hard Drive not Installed” Error on Laptop

The arduous drive not put in error is an error message that seems when on the pre-boot setting. This error cuts off your OS entry, leaving you with solely a handful of troubleshooting strategies.

When the pc begins, BIOS comes into motion and tries to test and initialize each element concerned. For the booting course of, it asks for OS-boot recordsdata from the boot drive(arduous drive right here) to load them to RAM. 

But, if something comes between this communication of BIOS and the arduous drive, it declares the talked about error.

What Causes Hard Drive not Installed Issue?

A tough drive can expertise logical glitches making it unresponsive and unrecognized by the laptop computer. Some different causes of laptops not detecting arduous drive issues embody:

  • Misconfigured BIOS settings
  • Outdated BIOS
  • Faulty connection
  • Damaged arduous drive

Solve Hard Drive not Installed Issue on Laptop

Rebooting your laptop computer as soon as can probably repair the problem if it’s experiencing some short-term glitches. But if it doesn’t work, energy biking is a more practical methodology which is given beneath, together with different options to the problem:

Power Cycle the Laptop

Sometimes the I/O units and parts inside your PC develop into unresponsive due to a right away halt of all of the working processes. This seizure can come up attributable to varied causes, most likely sudden energy cuts or shutdowns.

To repair such an issue, you’ll be able to carry out an influence cycle. It will assist drain the cost out of all of the parts and can allow them to initialize to their default state for a contemporary session. Follow the steps talked about beneath to take action:

  1. Detach all of the peripherals and disconnect your laptop computer from any energy supply.
  2. Open the again panel to take away the battery.
    remove-laptop-internal-battery-min
  3. Press and maintain the ability button for 15-20 seconds.
    power-cycle
  4. Put again the battery.
  5. Connect the laptop computer to the ability supply and activate the laptop computer.

Check if it resolved the problem.

Use OEM Specific Tools

Many PC producers present diagnostic instruments to scan and troubleshoot the mentioned form of errors. You can seek for pre-boot diagnostic instruments on your laptop computer’s model on their particular web site.

But this problem is discovered to be concurrent among the many Dell laptops, so we’ll be itemizing the precise steps of their diagnostic device. The steps for Dell’s diagnostic device are as follows:

  1. Start your laptop computer and press the F12 key continually.
  2. After it hundreds the display screen, select Diagnostics with the down arrow key and hit Enter.
    diagnostic-in-dell
  3. Let it initialize the storage and go together with the on-screen exams and directions to finish.

If it doesn’t repair the problem, the chance of bodily harm to the arduous drive is excessive.

Change BIOS Settings

BIOS being the firmware manages the management over the I/O units hooked up to the motherboard. Thus, there are settings associated to arduous drives and different storage units as effectively. If these settings are misconfigured, a tough drive not put in problem can come up. 

So, let’s leap ahead to set the BIOS to UEFI mode, allow safe boot, and allow an AHCI connection. Start your laptop and comply with these steps to take action:

  1. Press the BIOS key continually. (Generally, a operate keys(F2, F8, F10, and so on), however might differ in keeping with motherboards)
  2. Once you might be into BIOS, select UEFI as boot mode in case your boot partition is GPT formatted.
    uefi-boot-mode-in-bios
  3. Also, disable safe boot to keep away from any issues inside OEM safety checks.
    disabled-secure-boot
  4. In case it’s already UEFI, attempt to boot by switching to legacy, because the boot drive could also be MBR formatted. An MBR-style boot partition isn’t supported by UEFI.
  5. Select AHCI from SATA Operations or related.
    ahci-mode
  6. Save and exit BIOS by urgent the instructed key.
  7. Start the pc and test if it solves the issue.

Reset BIOS/Update BIOS

Since no tweaked settings labored, it is best to reset the BIOS settings to default manufacturing unit ones. This will make sure that no settings from BIOS are inflicting the ‘arduous drive not put in’ downside to happen.

To achieve this,

  1. Enter BIOS, as talked about within the earlier part.
  2. Continue to continually press the BIOS key and wait until the BIOS hundreds.
  3. Then, go to Default Setup or Restore Settings. The precise choice might range in keeping with BIOS but it surely ought to denote one thing much like that.
  4. And comply with the directions on the display screen to reset BIOS to manufacturing unit settings.

Or, even in the event you already reset the BIOS, likelihood is the issue is because of outdated BIOS, though in uncommon cases. Updating BIOS isn’t at all times a compulsory answer, as an interruption within the course of can additional harm the BIOS chip.

But it is best to test and ensure in the event you’re working the newest BIOS in your PC earlier than transferring on to the upcoming options.

Check and Reseat Hard Drive 

Hard drives are linked to the motherboard with some type of cable connection, primarily SATA. Most of them would have direct pin connections to devoted slots on laptops, and a few of them would even be soldered of their place. If the connection channel is damaged, the pc received’t acknowledge any arduous drive.

You must clear the mud/rust on the arduous drive slot and reseat the drive correctly to make sure its connection works correctly. Make positive your laptop computer is turned off and never linked to the ability supply, then comply with the steps talked about beneath to conduct so:

  1. Open up the again panel or any arduous drive compartment on the again.
  2. Locate the HDD and take it out if it isn’t soldered.
    take out hdd min
  3. Use a compressed air can or blower to clear mud from the ports.
    blow-dust-from-ports-min
  4. You can use a brush to scrub the mud across the slot.
    brush-the-hdd-slot-min
  5. Use Q-tips or microfiber fabric to scrub the connection pins on HDDs.
    clean-hdd-pins-min
  6. Rubbing alcohol can be utilized to scrub filth and rust on the pins. However, apply it from a fabric fairly than pouring straight on the gadget. Also, dry it out utterly to keep away from any harm. 
  7. Then, reseat the HDD correctly inside its slot and shut the again panel.
  8. Turn on the laptop computer and test if it solves the problem.

Deal with Physical Damage

Now, after coping with the above options, in the event you nonetheless are left with the arduous drive not being put in downside, the possibilities of the arduous drive having bodily damages are excessive. Try to test in case your arduous drive is defective through the use of it on a special PC utilizing HDD circumstances. Or you can too attempt to change your HDD.

We advocate consulting an skilled or the producer’s assist assistant for any additional harm. 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *